Utility Pump Logo Beckson Utility Pumps

ALL PLASTIC - SELF PRIMING - SELF LUBRICATING - EASY CLEANING - WILL NOT CORRODE

UTILITY PUMPS Beckson's Handy-Mate® pumps can be used around the HOME, CAR, RV or ANYWHERE to handle routine and emergency pumping jobs. They are designed to handle all the routine pumping jobs, plus the unusual ones. They can pump water out of bilges, sump tanks and from one tank to another, or pump oil from inboard or stern drive or engine crankcases when it needs changing. A tube is provided to insert into the dipstick hole and the oil is quickly pumped out. The especially versatile 216PC pumps come with a kit of tubes, hoses, reducing foot and adapter. The Handy Mate® is made entirely of tough marine plastic. It will not rust or corrode, is non-sparking for safety, and requires no priming to start pumping action. The pump body has a diameter of 1-1/2" (38mm), and it is fitted with a comfortable molded handle for easy, no-strain operation.

Model 212A is for use in draining trans, drain pipes, or other curved piping. Also for pumping from tanks or semi-closed places. Three feet of flexible tube fits into the foot of the pump and extends down into trap or drain. Discharge tube for directing discharge into pail or bucket.

Click on Model# to order

CA Prop 65 info
Beckson 212PC Pump
 Model# 212PC

Length: 12-3/4" (32.4cm)
Diameter: 1-1/2" (38mm)
Pumps: 8 oz./stroke
Two intake tubes:
1/2" (7mm) x 22" (56cm)
1/4" (7mm) x 36" (91.4cm) w/adpt
Red discharge tube:
1-1/4" (45mm) x 10" (25mm)
Beckson 216 Series Pump Model# 216PC

Length: 16" (40.6cm)
Diameter: 1-1/2" (38mm)
Pumps: 10 oz./stroke
Two intake tubes:
36" (91.4cm) long x 1/2' (13mm)
1/4" (7mm) x 36" (91.4cm) w/adptr
Flexible hose for water discharge:
1-1/4" (45mm) x 24" (61cm)
Red discharge tube for oil:
1-1/4" (45mm) x 10" (25mm)
Beckson 212A Series Pump Model# 212A

Length: 12-3/4" (32.4cm)
Diameter: 1-1/2" (38mm)
Pumps: 8 oz./stroke
One intake tubes:
1/2" (7mm) x 22" (56cm)

Red discharge tube:
1-1/4" (45mm) x 10" (25mm)

CRANK CASE PUMPS
Beckson's Crank Case Pump virtually eliminates the mess associated with dipstick oil changes. The Handy- Mate® 212PGA is specially adapted to pump crank case oil from engines equipped with a threaded fitting on the top of the dipstick tube. Threaded adapter fits standard male garden hose couplers. Pump attaches quickly and securely. Large pump body and long pump stroke pumps out crankcase oil quickly, easily and cleanly. The Handy-Mate® is made entirely of tough marine plastic. It will not rust or corrode. Handy-Mate® uses non-sparking materials for safety and is self priming for almost instant pumping action.

Beckson 212PGA Model# 212PGA

Length: 12-3/4" (32.4cm)
Diameter: 1-1/2" (38mm)
Red discharge tube:
1-1/4" (45mm) x 10" (25mm)

NOT FOR HOT OIL
Personal injury, fire and/or pump damage may occur when oil temperature is greater than 120°F (49°C). Guidelines for handling flammable liquids can be obtained from the National Fire Protection Agency, Batterymarch Park, Quincy, MA 02269

Beckson TM "Thirsty-Mate" and the red and gray colors and angled outlet sleeve of these products are registered trademarks of Beckson.   The "T" shaped pump handle and the color red applied to the handle are registered trademarks of Beckson. Reg U.S. Patent & TM Off.