Beckson Rigid Recessed Drink Holders
Install almost anywhere. Table, counter top, dashboard, seat-back, etc. Ship's galley, R.V., car, pickup, or camper. Largest size accommodates cans with insulator sleeves, soda and wine bottles. Perfect for keeping the galley organized. These cup holders provide features unattainable in other products. There is a generous cavity under the flange for caulking, allowing installation without fasteners. There are molded in stand-offs on the bottom of our standard drink and super-size holders to help prevent condensation build-up and keep containers from sticking to the bottom, and four generous holes that allow for drainage at different angles. Beckson's Drain Spigot Cup holder allows routing by hose of rainwater, spray and spills past moisture sensitive electronics or dry storage. Beckson Super Size and Drain Spigot Drink holders will hold 1 liter bottles, and cans with foam insulating rings., as well as soda and beverage cans or glasses alone.
![]() |
GH31 Shallow SeriesShallow Size Can HolderNice tight fit for can and water bottles. When space is at a premium, this fits nicely. ID: 2 11/16" (6.8cm) Width of Flange: 3 1/2" (8.9cm) Cup Depth: 1 3/8"(3.5cm) Hole Cut: 3" (7.6cm) Model No. Color GH31-B1 Black GH31-N1 Beige GH31-S1 Grey GH31-W1 White |
![]() |
GH33 Standard SeriesStandard Size Can HolderNice tight fit for can and water bottles. It is a single step model, but is deep enough to keep the container secure. ID: 2 11/16" (6.8cm) Width of Flange: 3 1/2" (8.9cm) Cup Depth: 2 7/8"(7.3cm) Hole Cut: 3" (7.6cm) Model No. Color GH33-B1 Black GH33-N1 Beige GH33-S1 Grey GH33-W1 White |
![]() |
GH43 Super Size SeriesSuper CupThis is a two step model. The inner step holds cans and air horns like the GH31 and GH33 series, but the outer step holds can with insulators, wine bottles, etc. ID: 3 9/16" (9.0cm)Width of Flange: 4 3/8" (11.1cm) Cup Depth: 3 1/4"(8.3cm) Hole Cut: 3 7/8" (9.8cm) Model No. Color GH43-B1 Black GH43-N1 Beige GH43-S1 Grey GH43-W1 White |
![]() |
GH43D Drain Spigot SeriesSuper Cup with DrainBeckson's biggest cup with a nipple to mount a drain hose so the cup drains where you want it to. ID: 3 9/16" (9.4cm) Width of Flange: 4 3/8" (11.1cm) Cup Depth: 3 1/4"(8.3cm) Hole Cut: 3 3/4" (9.5cm) Model No. Color GH43DB1 Black GH43DN1 Beige GH43DS1 Grey GH43DW1 White |